• 1.psd_0000_IMG_0623(1).jpg
  • 1.psd_0001_IMG_0616(1).jpg
  • 1.psd_0002_IMG_0610(1).jpg
  • 1.psd_0003_IMG_0604(1).jpg
  • 1.psd_0004_IMG_0600(1).jpg
  • 1.psd_0005_IMG_0598(1).jpg
  • 1.psd_0006_IMG_0594(1).jpg
  • 1.psd_0007_IMG_0588(1).jpg
  • 1.psd_0008_IMG_0585(1).jpg
  • 1.psd_0009_IMG_0584(1).jpg
  • 1.psd_0010_IMG_0583(1).jpg
  • 1.psd_0011_IMG_0582(1).jpg
  • 1.psd_0012_IMG_0581(1).jpg
  • 1.psd_0013_IMG_0580(1).jpg
  • 1.psd_0014_IMG_0577(1).jpg
  • 1.psd_0015_IMG_0576(1).jpg
  • 1.psd_0016_IMG_0575(1).jpg
  • 1.psd_0017_IMG_0574(1).jpg
  • 1.psd_0018_IMG_0572(1).jpg
  • 1.psd_0019_IMG_0570(1).jpg
  • 1.psd_0020_IMG_0569(1).jpg
  • 1.psd_0021_IMG_0568(1).jpg
  • 1.psd_0022_IMG_0567(1).jpg
  • 1.psd_0023_IMG_0566(1).jpg
  • 1.psd_0024_IMG_0564(1).jpg
  • 1.psd_0025_IMG_0560(1).jpg
  • 1.psd_0026_IMG_0553(1).jpg
  • 1.psd_0027_IMG_0550(1).jpg
  • 1.psd_0028_IMG_0547(1).jpg
  • 1.psd_0030_1200g-展开(1).jpg
  • 1.psd_0032_右侧副本(1).jpg
  • 1.psd_0033_空调(1).jpg
  • 1.psd_0034_IMG_0640(1).jpg
  • 1.psd_0035_IMG_0637(1).jpg
  • 1.psd_0036_IMG_0632(1).jpg
  • 1.psd_0037_IMG_0630(1).jpg
  • 1.psd_0038_IMG_0626(1).jpg


It can provide suitable and reasonable plant protection solutions for large growers, family farms, agricultural machinery cooperatives and large farms. At the same time, Zhongnong Fengmao is also a supplier of mechanization solutions for orchards and a service provider for agricultural and forestry plant protection.


Self-Propelled Sprayer Series

Key words:

Zhongnong Fengmao Plant Protection Machinery




































1. 全液压行走、转向,操作省力;


2. 根据用户需求可以选配两轮或四轮驱动,配置后轮减震和前桥摆动,可以在崎岖不平的田地间畅通无阻;


3. 具有多种转向模式(两轮转向,四轮转向,蟹型行走),可以使机器在狭小地域内灵活转移


4. 超高地隙,更好地适应了中国特殊而复杂种植模式的需求;


5. 整体采用门框式结构,作业时只有两行在作物间穿行,减小了对作物行距的要求;穿行结构轮胎中心轴处只有370mm,通过性好,可以适应小的行距作物;


6. 进口喷嘴,雾化加均匀,减少农药使用量,降低农药残留,采用三喷头体的喷头,同时配有三种不同喷嘴,可以适应多种农艺喷洒要求;


7. 配置变量喷雾控制系统,实时显示作业速度、工作压力、单位面积施药量、已作业面积等参数;可按照设定的单位面积施药量进行精准喷洒农药;


8. 进口隔膜泵,流量稳定,寿命长;


9. 搅拌采用射流搅拌结合回水搅拌,确保药液搅拌均匀;


10. 完美的电液结合控制技术,在驾驶室内即可完成喷杆的展开、折叠、升、降、左右平衡和喷雾开关,一人即可完成所有作业需求。

Previous Page

Next Page

1. Technical parameters:   1) The structure of the whole machine: door frame structure,   2) Main beam ground clearance: 2400mm;   3) The volume of the Main tank: 500 liters × 2, distributed on both sides of the whole machine, and the overall use of engineering plastics rotational molding process;   4) Stirring method: backwater stirring + jet stirring;   5) Filter system: three-stage (Main tank mouth, front of the pump, at the nozzle);   6) The maximum operating speed is 9km/h,   7) The maximum transport speed is 18km/h;   8) Fuel tank volume: 70L;   9) Wheel base adjustable range: 2050-2650mm;   10) Engine rated power: 65/2600kW/rpm;   11) Full hydraulic stepless speed change, the number of forward gears is 2, and the number of reverse gears is 1;   12) Hydrostatic four-wheel drive;   13) Full hydraulic steering system;   14) Hydraulic service brake, mechanical parking brake;   15) Diaphragm pump   16) Pump type: 3-diaphragm diaphragm pump;   17) Liquid pump flow: 126-132L/min   18) The minimum distance between the nozzle and the ground: 400mm;   19) Configure variable spray control system   20) Real-time display of parameters such as operating speed, working pressure, application amount per unit area, and operating area;   21) Accurate spraying of pesticides can be carried out according to the set application rate per unit area;   22) Dimensions: 7200mm×2740mm×3400mm (13.5m)   7700mm×2740mm×3400mm (15.5m)   23) Boom length: 13.5/15.5m;   24) Boom height adjustment range: 400mm-3300mm;   25) Nozzle spacing: 500mm;   26) Configure three nozzle body nozzles   i. Install 110° fan-shaped No. 11002, No. 11003 and No. 11004 nozzles respectively;   27) Cab lifting range: 750mm-2400mm.   28) Minimum inside turning radius: 3.9 meters   29) Hydraulic tank capacity: 110L.   30) Wheelbase: 2.82m;   31) Front tire: high-profile pneumatic rubber tire, outer diameter: 995mm, tire width: 210mm;   32) Rear tire: high-profile pneumatic rubber tire, outer diameter: 1250mm, tire width: 240mm; 2. Product Features:   1) Full hydraulic walking, steering, and labor-saving operation; large steering angle, minimum operating radius of 3.9 meters (inside), and flexible turning in narrow areas.   2) Two-wheel or four-wheel drive can be selected according to user needs, equipped with rear wheel shock absorption and front axle swing, which can be unobstructed in rough fields.   3) With a super high ground clearance of 2400mm, it better adapts to the needs of China's special and complex planting patterns.   4) The door frame structure is adopted as a whole, and only two rows pass through the crops during operation, which reduces the requirement for the row spacing of the crops; the central axis of the tire of the passing structure is only 370mm, which has good passability and can adapt to crops with small row spacing.   5) Imported nozzles, atomize evenly, reduce the amount of pesticides used, and reduce pesticide residues. The nozzles with three nozzle bodies are equipped with three different nozzles at the same time, which can adapt to a variety of agronomic spraying requirements.   6) Equipped with variable spray control system, real-time display of parameters such as operating speed, working pressure, application rate per unit area, and operating area; accurate spraying of pesticides can be performed according to the set application rate per unit area;   7) Imported diaphragm pump with stable flow and long service life.   8) The mixing adopts jet agitation combined with backwater agitation to ensure that the liquid is stirred evenly.   9) The perfect electro-hydraulic combined control technology can complete the deployment, folding, lifting, lowering, left-right balance and spray switch of the boom in the cab, and one person can complete all the operation requirements.   10) Wide range of wheelbase adjustment (Xinjiang model 1950-2550mm, Mainland model 2050-2650mm), which can adapt to different crop planting patterns.

Online Inquiry

Submit RFQ